Bissregistriermaterial
Die Bissregistrierung ist ein Schritt von höchster Bedeutung bei der Anfertigung von Situationsmodellen, Zahnersatz, Aufbissschienen, kieferorthopädischen Apparaturen, etc. Sie dient zur präzisen und eindeutigen Verschlüsselung der dreidimensionalen Anordnung von Oberkiefer und Unterkiefer in der gewünschten Relation.
Bissregistriermaterial
Neben zunehmend populären, technisch noch sehr aufwändigen primär digitalen (virtuellen) Verfahren werden heute meist noch analoge Registriermethoden verwendet. Dazu stehen vor allem reversibel thermoplastische (Wachs, Harze, Guttapercha), chemisch härtende (ZnO, Kunststoffe) und irreversibel elastische Bissregistriermaterialien (z.B. VPS = Vinylpolysiloxane) zur Verfügung. Sie werden entweder unmittelbar auf natürliche oder prothetische Antagonisten aufgebracht oder zur Fixierung/Verschlüsselung individuell gefertigter Bissschablonen genutzt, in der Total- und Teilprothetik etwa in Form einer Basis aus Kunststoff (früher auch Schellack) und aufgesetzten Bisswällen aus Wachs oder als Verbindung der Platten (Kunststoff, Metall) von Ober- und Unterkiefer beim Stützstiftregistrat.
Zinkoxid-Eugenol-Bissregistriermaterial
Silikon-Bissregistrat (Überprüfung)
Die den Abformmaterialien eng verwandten additionsvernetzenden Silikon-Bissregistriermaterialien (A-Silikone), bieten die Vorteile von Fließfähigkeit (geringer Bisswiderstand, Vermeidung von Bissverschiebungen) und Standfestigkeit (kein Abfließen) durch Thixotropie, Detaildarstellung (Zeichnungsschärfe), Dimensionsstabilität (Entformung aus Unterschnitten), Temperaturstabilität, guter Bearbeitbarkeit (Beschleifen und/oder Beschneiden) und Unempfindlichkeit gegenüber Feuchtigkeit oder mechanischer Belastung (Druck, Zug) nach der Aushärtung. Farbe, Transparenz oder Opazität, Abbindezeit und Endhärte (Shore A bis Shore D), sowie die Scanbarkeit sind je nach Anwendungsbereich in weiten Grenzen modifizierbar. Die Anwendung erfolgt meist als Zwei-Komponenten-Bissregistriermaterial. (Basis + Katalysator/Aktivator) in standardisierten Kartuschen, die mittels Mischpistolen und Mischkanülen angemischt und appliziert werden.
... or need professional advice?
Get in touch with us or click Contact.
English | German |
---|---|
estimate | Kostenvoranschlag |
Wax build-up technique Wax build-up technique The various anatomical structures (such as cusp tips and slopes as well as marginal ridges) are usually built up one after another by adding small portions of wax (often using differently coloured waxes for didactic purposes). The firm, special waxes first have to be melted at room temperature. This can be carried out by warming small portions on differently shaped working tips of hand instruments in an open flame (such as a gas burner) or using electrically heated instruments which provide for more accurate temperature control and avoid contamination (e.g. electric wax-knife, induction heaters, wax dipping units). The wax is applied drop-by-drop to ensure that the warmer molten wax added last fuses seamlessly with the firm, cooler material. After hardening, the wax pattern can be reduced by sculpting, milling guidance surfaces or drilling to add retainers. Modern procedures include flexible, occlusal preforms for adding contours to soft wax. In addition, wax preforms, such as for occlusal surfaces or bridge pontics, are available in various shapes and sizes. Recently, irreversible, light-curing materials have been introduced for use instead of reversible thermoplastic waxes. Wax preforms To ensure that the wax pattern can be released without being damaged, model surfaces, opposing dentition and preparations must be hardened/sealed with special lacquer (applied by spraying, brushing or dipping). These waxes are mostly relatively rigid/elastic after cooling. Attaching wax sprues to a removable framework supported on double crowns using a hand instrument When employing the lost wax technique, prefabricated wax sprues, bars and reservoirs are attached to the patterns. Once the pattern has been released and its sprues waxed onto the crucible former, it is invested in a casting ring with refractory investment material. The wax can then be burnt out residue-free and casting completed. Unlike standard wax build-up techniques, a diagnostic wax-up is not intended for fabricating an indirect restoration, but rather for simulating the appearance and/or external contouring for producing orientation templates. |